Work Session #1

Work Session #1

February 2nd, 2026 by Shane Lambert 9 photos

Work Session #1 on February 1st, 2026 is in the books. Thanks to Charles Sherman, Tom Heilman, Ron Copher and Al Lesky for coming out to get this project rolling. We are able to get hardware on 15 of the 16 modules built for me by Dan Benjamin, wiring on multiple modules, and we had 3 modules standing at the end of the day.

PXL_20260202_010058677

Here are several of the modules and a set of legs completed

PXL_20260202_010107939

Two of the 22.5 degree curves standing for a test

PXL_20260202_010113855

These curve modules have a weird shape, but they'll make sense once track is installed.

PXL_20260202_010115083

Another view of the curve modules.

PXL_20260202_010119809

Al cut up a lot of wire, Ron stripped and crimped ring terminals, and I added APP connectors.

PXL_20260202_010127462

Here we have a module that Tom finished wiring before the end of the day.

PXL_20260202_010130941

I completed this module after the guys left. TWO DOWN!

PXL_20260202_165601365

Here is a photo of mass production of legs

PXL_20260202_165730561

This pile started with 60 leg blanks. Before long, all of the legs will be done.